Machine Vision Lighting Products
Browse our full range of industrial machine vision lighting: LED bar lights, backlights, diffuse dome lights, coaxial lights and spotlights for reliable inspection.
Every format below solves a different lighting-geometry problem: bar lights illuminate a flat field directly, backlights extract silhouettes, dome lights remove glare from curved or reflective parts, coaxial lighting reveals defects along the camera's own optical axis, and spot/floodlights reach targets no close-mounted light can. Picking the wrong geometry for the surface in front of the camera — not a weak LED — is the single most common reason a lighting setup underperforms.
LED Bar Lights
High-output LED bar lights for line-scan and area-scan inspection, available in multiple lengths, angles and colors for uniform field illumination.
Backlights
Uniform LED backlights for silhouette, contour and dimensional measurement applications, maximizing contrast for edge detection and gauging.
Diffuse Dome Lights
Diffuse dome lighting delivers omnidirectional, shadow-free illumination for reflective, curved or textured surfaces where direct lighting causes glare.
Coaxial Lighting
Coaxial lighting projects light along the camera's optical axis, revealing surface defects, etchings and codes on shiny or mirror-like parts.
LED Spotlights
High-intensity LED spotlights and floodlights for long working distances, large fields of view and outdoor or high-ambient-light inspection.
B2B Integration Considerations
EMC Compliance
Our lights use electronics designed for EMC immunity against the conducted and radiated disturbances typical of an industrial environment — VFDs, servo drives — a prerequisite for stable operation near automation equipment.
LED Thermal Management
Heat dissipation through the aluminum body directly governs LED lifetime and light output over time — a key point to validate for any continuous, high-intensity operation.
Supply Continuity & Dual Sourcing
Our ranges share a standardized M12 connector and 24VDC supply, making it easier to fit them into a dual-sourcing plan without redesigning the electrical interface.